TileLab 1gl SurfaceGard Penetrating Sealer
Tilelab Surfacegard Sealer 1 gallon
TileLab SurfaceGard penetrating Sealer inhibits mold and mildew growth for interior and exterior high use areas.
SuraceGard provides unsurpassed, invisible protection for marble, stone, porcelain, granite, grout and tile.
Interior and exterior use.
Surface Preparation: Always test in an inconspicuous area.
Surface should be clean , dry and free from efflorescence, waxes, coating or finishes.
Allow grout to cure at least 48 hrs.
Applications: Apply liberally using a new mop, lambs wool applicator, or sponge.
Allow it to penetrate for up to 5 minutes.
Immediately wipe off any sealer completely before it dries.
Drying time 2 - 3 hours
- 32oz Approximate 200-300 sq ft
- 64oz Approximate 400-600 sq ft
- 1gl Approximate 800-1200 sq ft
Tile Types: All stone surfaces, unglazed tile, porcelain, clay pavers, concrete, brick, masonry, grout